How to guard against dishonest mechanic?
The best solution when it comes to servicing cars of choice is a trustworthy mechanic. It is not always possible, however, and often urgent need to repair our car brings us to the first workshop better. Therefore, the maintenance of cars is often very complicated process, and a relatively small portion of the users of cars are aware of this, as should proceed car repair easily become a victim of fraud. We can never be sure yet how much of the car has been mentioned, if you do not have enough knowledge on this topic. Therefore it is worth before going to the workshop to do some research on this type of service, for example, among family and friends.
What follow when choosing a mechanic?
Defects or minor failures occur in every car, and this is due to its operation. It would seem that the older the car, the more trouble, however, and the latest models can sometimes give bone its owner. In such a situation, there is nothing else to look for a mechanic who not only repair the vehicle, but the occasion does not demand for the service a lot of money. The cost will depend on how large the scope of work will need to be carried out and whether it is necessary to buy spare parts. Surely every driver wants to give up your car in the best possible hands, so it is worth looking mechanics guided by the opinion of customers who have already benefited from its services and are happy with the result.
This increases fuel consumption
Motor oil is a lubricant used in internal combustion engines, which power cars, motorcycles, lawnmowers, engine-generators, and many other machines. In engines, there are parts which move against each other, and the friction wastes otherwise useful power by converting the kinetic energy to heat. It also wears away those parts, which could lead to lower efficiency and degradation of the engine. This increases fuel consumption, decreases power output, and can lead to engine failure.
Lubricating oil creates a separating film between surfaces of adjacent moving parts to minimize direct contact between them, decreasing heat caused by friction and reducing wear, thus protecting the engine. In use, motor oil transfers heat through convection as it flows through the engine by means of air flow over the surface of the oil pan, an oil cooler and through the buildup of oil gases evacuated by the Positive Crankcase Ventilation (PCV) system.
In petrol (gasoline) engines, the top piston ring can expose the motor oil to temperatures of 160 °C (320 °F). In diesel engines the top ring can expose the oil to temperatures over 315 °C (600 °F). Motor oils with higher viscosity indices thin less at these higher temperatures.
Coating metal parts with oil also keeps them from being exposed to oxygen, inhibiting oxidation at elevated operating temperatures preventing rust or corrosion. Corrosion inhibitors may also be added to the motor oil. Many motor oils also have detergents and dispersants added to help keep the engine clean and minimize oil sludge build-up. The oil is able to trap soot from combustion in itself, rather than leaving it deposited on the internal surfaces. It is a combination of this, and some singeing that turns used oil black after some running.
Rubbing of metal engine parts inevitably produces some microscopic metallic particles from the wearing of the surfaces. Such particles could circulate in the oil and grind against moving parts, causing wear. Because particles accumulate in the oil, it is typically circulated through an oil filter to remove harmful particles. An oil pump, a vane or gear pump powered by the engine, pumps the oil throughout the engine, including the oil filter. Oil filters can be a full flow or bypass type.